The patient may need up to three appointments throughout the procedure: diagnosis and treatment planning, preparation and combination.
The company is located in:
It is important that you play a positive role in your smile design. Spend time on a smile plan. Understand the correctional limitations of the program. If necessary, consult more about your dentist's understanding of your goals.
The company is located in:
To prepare veneer teeth, gently polish the teeth so that the thickness of the veneer is minimally increased. Normally, about half a millimeter of the tooth is removed, which may require a local anesthetic. Composite resin finishes are usually on a date. After the teeth are ready, the dentist carefully bonds the composite to the teeth. For ceramic finishes, remove the teeth from the mold and send it to the lab to make the veneer. This may take a few days. If the teeth are too ugly, temporary masks can be placed at extra cost.
The company is located in:
When your ceramic veneer is ready, the dentist places each veneer on his teeth to check suitability and to get the feel of shades or colors. When the veneer is on the teeth, observe the result and pay special attention to the color. At this point, the color of the board can still be adjusted according to the color of the cement to be used. Veneer glue color can not be changed. To apply veneers, the teeth are cleaned with a specific chemical to obtain a bond. Once the special cement is sandwiched between the plywood and the teeth, the light beam hardens the cement.
