Because the dental integrated treatment chair is the patient for the patient to treat the necessary equipment, the utilization rate is high. It is also the equipment of gas, water and electricity, daily maintenance is directly related to the equipment life length and the equipment integrity rate, so the daily maintenance work is particularly important.
1: the first is the maintenance of mobile phone, it is a key component of dental treatment chair, in use process, to avoid the cross infection between the patients, mobile phone also must go through high temperature and high pressure sterilization, to extend the service life of mobile phone, should pay special attention to daily maintenance.
Before first use, application of needle in the shaft into the 1 ~ 2 drops the lubricating oil, under normal circumstances, the head should be cleaned daily use clean lubricant, each work should be clean miniature bearing after 2 weeks at a time. Normal 0 should be maintained. 2 to 0. Work pressure of 25Mpa; When there is no water, the phone cannot be idle, otherwise it will damage the bearing. When the needle is blunt, it should replace the new car needle in time, otherwise it will also affect the bearing life.
2: therapy machine maintenance is mainly qi road, waterway maintenance, every day should be off gas, water, electricity, in particular, should be used after shut gas three spray gun put out, the lumen of the gas in order to avoid long-term in a state of high pressure pipeline, easy to aging rupture. Clean water strainer regularly according to the local water quality. Clean the water in the pressure valve of the air filter regularly: clean the suction and suction device in time, and clean the pipe frequently. Will also pay special attention to the point that the water pressure and air pressure, must be within the scope of the regulations, so as not to cause filter and piping critical crack: surgical lights and the number of lights can't switch frequently, it will shorten the life of the bulb.
3: the maintenance of the patient's seat should check the transmission parts regularly. The position of mechanical transmission should be lubricated regularly. Electric hydraulic transmission should check the oil quantity and oil quality of the tank regularly, and timely replenish and replace when the oil quantity is insufficient or the oil quality is not good. Belt drive should pay attention to adjusting belt slack.
